TM 9-2320-280-20-2
4-31. TIME DELAY MODULE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Battery ground cable disconnected (para. 4-73).
automotive (Appendix B, Item 1)
Hood raised and secured (TM 9-2320-280-10).
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
a. Removal
1. Disconnect connector plug (3) from control valve connector (5).
2. Disconnect connector plug (2) from engine harness (4).
3. Remove two screws (1) and time delay module (7) from cowl (6).
b. Installation
1. Install time delay module (7) on cowl (6) with two screws (1).
2. Connect connector plug (2) to engine harness (4).
3. Connect connector plug (3) to control valve connector (5).
FOLLOW-ON TASKS:
Connect battery ground cable (para. 4-73).
Lower and secure hood (TM 9-2320-280-10).
4-53
