TM 9-2320-280-20-2
4-37. TRANSFER CASE INDICATOR LAMP CABLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M1097, “A1” and “A2” series
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Battery ground cable disconnected (para. 4-73).
automotive (Appendix B, Item 1)
Engine access cover removed (para. 10-15).
Materials/Parts
Four tiedown straps (Appendix G, Item 242)
a. Removal
1. Disconnect leads 511A (6) and 511B (7) from indicator switch leads (5) on transfer case (3).
2. Remove four tiedown straps (2) from cable assembly (1) and flex driveshaft (4). Discard tiedown straps (2).
3. Disconnect lead 511A (8) from lamp assembly lead (9).
4. Disconnect leads 458B (12) and 458C (11) from fan temperature switch lead (13) and engine wiring
harness lead 458A (10) and remove cable assembly (1) from vehicle.
b. Installatiaon
1.
Position cable assembly (1) in approximate mounting location on vehicle.
2. Connect leads 458B (12) and 458C (11) to fan temperature switch lead (13) and engine wiring
harness lead 458A (10).
3. Connect lead 511A (8) to lamp assembly lead (9).
4. Connect leads 511B (7) and 511A (6) to indicator switch leads (5) on transfer case (3).
5. Install cable assembly (1) to flex driveshaft (4) with four tiedown straps (2).
4-60
