TM 9-2320-280-20-2
4-18. HIGH BEAM LAMP REPLACEMENT
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item
Manual References
TM 9-2320-280-24P
Equipment Condition
Electrical gauges removed (para. 4-13).
Speedometer/odometer removed (para. 4-14).
NOTE
Prior to removal, tag leads for installation.
a. Removal
1. Remove two light lenses (7) from instrument cluster back panel (4).
2. Remove instrument cluster (6) from instrument cluster back panel (4).
3. Disconnect harness lead 57L (1) and lead 17B (2) from high beam lamp (5).
4. Remove two screws (3) and high beam lamp (5) from instrument cluster back panel (4).
b. Installation
1. Install high beam lamp (5) on instrument cluster back panel (4) with two screws (3).
2. Connect harness lead 57L (1) and lead 178 (2) to high beam lamp (5).
3. Install instrument cluster (6) on instrument cluster back panel (4).
4. Install two light lenses (7) on instrument cluster back panel (4).
FOLLOW-ON TASKS: Install speedometer/odometer (para. 4-14).
Install electrical gauges (para. 4-13).
4-38
