NOTE
Prior to removal, tag leads for installation.
1.
Remove two screws (2) from brake warning lamp (1) and instrument panel (5).
2.
Disconnect leads 67 (7) and 27 (3) from wiring harness leads (6).
3.
Slide brake warning lamp (1) down toward steering column (4) and remove brake warning lamp (1).
NOTE
Place tape around lead wires to keep lamp in proper position
during installation.
1.
Install tape (8) around lamp (1) and lead wires (7) and (3).
2.
Slide brake warning lamp (1) up along steering column (4) and install brake warning lamp (1) on
instrument panel (5) with two screws (2).
3.
Connect leads 67 (7) and 27 (3) to wiring harness leads (6).
b. Installation
a. Removal
INITIAL SETUP:
TM 9-2320-280-20-2
4-36.2
Change 2
4-17.1. BRAKE WARNING LAMP REPLACEMENT
This task covers:
a.
Removal
b.
Installation
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Tape (Appendix C, Item 50)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
• Battery ground cables disconnected (para. 4-73).
• Air restriction gauge removed (para. 3-17).
