TM 9-2320-280-20-2
4-16. INSTRUMENT CLUSTER LIGHT REPLACEMENT (Cont'd)
c. Light Assembly Removal
1. Remove two light lenses (1) and gaskets (2) from light assemblies (4).
2. Remove lamp (3) from light assembly (4) being replaced.
3. Remove all electrical gauges (para. 4-13) and speedometer/odometer (para. 4-14).
4. Separate instrument cluster (8) from backing panel (6).
5. Disconnect harness lead 40B (5) from light assembly (4).
6. Remove two screws (7) and light assembly (4) from backing panel (6).
d. Light Assembly Installation
1.
2.
3.
4.
5.
6.
Install light assembly (4) to backing panel (6) with two screws (7).
Install backing panel (6) to instrument cluster (8).
Install all electrical gauges (para. 4-13) and speedometer/odometer (para. 4-14).
Connect harness lead 40B (5) to light assembly (4).
Install lamp (3) into light assembly (4).
Install two gaskets (2) and light lenses (1) on light assemblies (4).
FOLLOW-ON TASK: Connect battery ground cable (para. 4-73).
4-35
