TM 9-2320-280-20-2
4-6.8
Change 2
4-2.2. 100/200 AMPERE ALTERNATOR CABLE REPLACEMENT(Cont’d)
5. Install two tiedown straps (8) on cables (1) and (7).
6. Install cables (1) and (7) on water crossover stud (2) with clamp (3), washer (4), lockwasher (5), and
nut (6). Tighten nut (6) to 10-15 lb-ft (14-20 N•m).
7. Apply sealant to positive stud (10) and cable (7), coating all exposed metallic surfaces.
8. Install cable (7) on positive stud (10) with washer (12), lockwasher (13), and nut (9). Tighten nut (9)
to 10-15 lb-ft (14-20 N•m).
9. Slide rubber boot (11) on cable (7).
