NOTE
• Prior to removal, tag leads for installation.
• Note number of clamps and tiedown straps for installation.
1. Slide back rubber boot (11) and remove nut (9), lockwasher (13), washer (12), and cable (7) from
positive stud (10). Discard lockwasher (13).
2. Remove nut (6), lockwasher (5), washer (4), and clamp (3) from water crossover stud (2). Discard
lockwasher (5).
3. Remove two tiedown straps (8) from cables (1) and (7). Discard tiedown straps (8).
a. Removal
INITIAL SETUP:
TM 9-2320-280-20-2
4-6.4
Change 2
4-2.2. 100/200 AMPERE ALTERNATOR CABLE REPLACEMENT
This task covers:
a.
Removal
d.
12-Volt Regulator Cable Installation
b.
Installation
e.
100/200 Ampere Alternator Ground Cable Removal
c.
12-Volt Regulator Cable Removal
f.
100/200 Ampere Alternator Ground Cable Installation
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealant (Appendix C, Item 47.1)
Two lockwashers (Appendix G, Item 109)
Five lockwashers (Appendix G, Item 140.2)
Six tiedown straps (Appendix G, Item 242.2)
Manual Reeferences
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
• Hood raised and secured (TM 9-2320-280-10).
• Battery ground cables disconnected (para. 4-73).
• Engine access cover removed (para. 10-15).
