TM 9-2320-280-20-1
STARTER CURRENT AVERAGE TEST #71
Description:
This procedure measures the average starter
current in the 0 - 1000 amps range. Test requires
DCA hookup only.
Typical Applications:
Check Starter Current.
Test Procedure:
1. Disconnect fuel solenoid wire 54A to prevent
startimg.
2. Set TEST SELECT switch to 71.
3. Press and hold TEST button until CAL
appears on display.
4. Release TEST button and wait for offset
value to appear on display. If offset is within
-150 to 150, proceed. If not, go to DCA
.Troubleshooting Procedure.
5. Press and release TEST button.
6. Crank engine.
7. Observe the displayed starter current.
Pre-Test Procedureas
Run Confidence Test.
Control Functions:
01,02,03,04,08
Possible Error Messages
E005 Offset not performed.
2-744
