TM 9-2320-280-20-1
BATTERY VOLTAGE TEST #67
Description:
This procedure measures battery
voltage in the 9 to 32 range volts. The
voltage is measured directly at the
power source of the VTM, and maybe
done with the vehicle operating or shut
down. Test requires DCA hookup only.
Typical Applications:
Check Battery Voltage
Test Procedure:
1. Set TEST SELECT switch to 67.
2. Press and release TEST button.
3. If .9.9.9.9 is displayed, voltage is
not within the test range.
4. Observe displayed value (volts).
Pre-Test Procedures:
Run Confidence Test.
Control Functions:
01,02,03,04,06
Possible Error Messages:
none
2-740