Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont'd)
ITEM
NO.
INTERVAL
ITEM TO BE
INSPECTED
PROCEDURES
11
Semi-
Brake
f. Inspect parking brake cable, cable
f. Parking brake binding
Annual
System
clip, lever, spring, and pushrod/guide
or cable frayed or broken.
(Cont'd)
pin for binding and loose components.
Spring or cable clip
missing.
g. On vehicles equipped with a single
parking brake assembly mounted
between the rear prop shaft and rear
differential, lubricate parking brake
lever, parking brake cam, parking
brake push pins, and parking brake
guide pins with WTR. On vehicles
equipped with a left and right parking/
service brake assembly mounted between
the rear axle half-shafts and rear
differential, lubricate the parking brake
lever with WTR. The parking/service
brake assembly needs no lubrication.
h. Inspect rear parking brake cables for h. Parking brake binding
damage and/or chaffing in the area of
or cable frayed or broken.
the control arm. If cables are damaged,
replace cables (paragraph 7-23 or 7-24).
i. Inspect for presence of, or damage to,
parking brake cable clamps.
12
Semi-
Engine and
a. Inspect engine mounts and insu-
a. Engine mounts or
Annual
Transmis-
lators for loose, worn, and damaged
insulators cracked,
sion Mounts condition.
damaged, loose, or worn.
b. Check for loose or missing engine
b. Capscrews or locknuts,
mount capscrews and locknuts. If
loose or missing.
engine mount capscrews or locknuts are
loose or missing, notify DS maintenance.
TM 9-2320-280-20-1
2-14
Change 1
NOT FULLY MISSION
CAPABLE IF:
