TM 9-2330-392-14&P
4-37 SHOCK ABSORBER REPLACEMENT (Con't)
d. SHOCK ABSORBER INSTALLATION
NOTE
Both shock absorbers are installed in the same manner.
Shock absorber rod is positioned at top end of shock absorber.
Antiseize compound must be applied to threads before starting nuts.
1.
Install shock absorber (4) to torsion arm mount (3) and top mounting bracket (2).
2.
Install washer (5) and slotted nut (6) to torsion arm mount (3), securing shock absorber (4). Tighten nut
(6) and torque to 185 + 18 lb-ft (251 + 25 N•m), ensuring slotted nut (6) and hole in torsion arm mount
(3) align. Install new cotter pin (7).
3.
Install mounting bolt (1) through top mounting bracket (2) and upper shock absorber (4) mounting ring.
4.
Install washer (5) and slotted nut (6) to frame mounting bolt (1), securing shock absorber (4). Tighten
nut (6) and torque to 185 + 18 lb-ft (251 + 25 N•m), ensuring slotted nut (6) and hole in frame mounting
bolt (1) align. Install new cotter pin (7).
4-106
Change 1
