TM 9-2330-392-14&P
4-37
SHOCK ABSORBER REPLACEMENT (Con’t).
b. SHOCK ABSORBER MOUNT BRACKET REMOVAL
NOTE
Both shock absorber mount brackets are removed in the same manner.
Perform steps 1 and 2 if mount is defective.
1.
Remove two locknuts (14), four flat washers (13), and two capscrews (12) securing shock absorber mount
bracket (2) to frame. Discard locknuts.
2.
Remove shock absorber mount bracket (2) from frame.
c.
SHOCK ABSORBER MOUNT BRACKET INSTALLATION
NOTE
Both shock absorber mount brackets are installed in the same manner.
1.
Install shock absorber mount bracket (2) on frame.
2.
Install two capscrews (12), four washers (13), and two locknuts (14) securing shock absorber mount
bracket (2) on frame. Tighten locknuts and torque to 72 + 7 ft-lb (98 + 9 N•m).
Change 1
4-105
