TM 9-2330-392-14&P
4-34.
RADIAL TIRE, WHEEL, AND RUNFLAT REPAIR (Cont).
WARNING
Ensure runflat compressor strap is centered around runflat. Failure to do so could cause injury to personnel
NOTE
Perform steps 12 and 13 when using runflat compressor P/N J39250. Perform steps 14 and 15 when
using runflat compressor P/N 528236.
12.
Position runflat compressor (14) on runflat (13) so that runflat compressor hex drive (15) is facing up and strap
(16) is centered around runflat (13).
NOTE
Compress runflat by rotating hex drive in either direction. Rotate hex drive opposite to loosen.
13.
Using runflat compressor (14), compress runflat (13).
14.
Position runflat compressor (17) on an outer edge of runflat (13) with handle assembly (18) facing up and strap
(19) centered around runflat (13).
NOTE
Compress runflat by rotating the handle assembly in a clockwise direction Rotate handle assembly
counterclockwise to loosen.
15.
Using runflat compressor (17), compress runflat (13).
NOTE
It may be necessary to use a tire spoon and detergent to remove runflat from tire.
When using runflat compressor P/N 528236, handle may need to be removed before removing runflat
16.
Remove runflat (13) from tire (6) and remove runflat compressor (14) or (17) from runflat (13).
4-88