TM 9-2330-392-14&P
4-34.
RADIAL TIRE, WHEEL, AND RUNFLAT REPAIR.
This task covers:
a. Disassembly
b.
Installation
b. Inspection and Cleaning
d.
Assembly
INITIAL SETUP:
Equipment Conditions: Materials/Parts:
•
Wheel removed (para 4-32).
•
Twelve Locknuts
•
O-Ring Seal
Tools/Test Equipment:
•
Detergent (Item 4, Appendix E)
•
General mechanics tool kit
•
Two Lubricant Packets
•
Common No. 1 shop set
•
Adhesive Tape (Appendix F, J)
•
J39250 (TM 9-2320-280-20-2)
•
Sealing Compound, if required (Item 12,
•
528236 (TM 9-2320-280-20-2) Appendix E)
General Safety Instructions:
•
Do not use tire machine.
•
Ensure tire is totally deflated before removing wheel locknuts.
•
Never use tubes in wheel assemblies.
•
Rim surfaces must be kept clean and free of rust and dirt.
•
Never use wheel assemblies with damaged studs.
•
Never inflate a wheel assembly with the wheel locknuts removed.
•
Never inflate a wheel assembly without first checking wheel locknut torques.
•
Do not exceed recommended tire inflation pressure.
•
Always use a tire inflation cage and a clip-on air chuck for tire inflation.
•
Ensure runflat compressor strap is centered around runflat.
4-85
