TM 9-2330-392-14&P
4-25. WHEEL CYLINDER REPLACEMENT.
This task covers:
a. Removal
b. Cleaning and Inspection
c. Installation
initial Setup:
Equipment Conditions:
Materials/Parts:
•
Wheel removed (para 4-32).
•
Rags (Item 10, Appendix E)
•
Hub/drum removed (para 4-33).
•
Dry Cleaning Solvent (Item 5, Appendix E)
Tools/Test Equipment:
•
General mechanics tool kit
•
Common No. 1 shop set
a. REMOVAL
NOTE
Use a suitable container to catch any draining brake fluid. Ensure that all spills are cleaned up.
1.
Remove front shoe spring (9) from front brakeshoe (4) and backing plate anchor pin (3).
2.
Remove rear shoe spring (10) from rear brakeshoe (12) and backing plate anchor pin (3)
3.
Remove washer (11) from backing plate anchor pin (3).
4-50
