25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d)
TM 9-2320-387-24-2
25-36.32
Change 1
28.
Using the right front underbody armor (1) as a template, match-drill six 13/32-in. (10.3-mm)
diameter holes from right front underbody armor (1) through passenger side footwell inner armor
(left side).
29.
Using the right front underbody armor (1) as a template, match-drill six 13/32-in. (10.3-mm)
diameter holes from right front underbody armor (1) through passenger side footwell outer armor
(right side).
30.
Using right front underbody armor (1) as a template, match-drill three 13/32-in. (10.3-mm)
diameter holes from right front underbody armor (1) through passenger side inner/outer cowl
reinforcement (3).
31.
Install right front underbody armor (1) to passenger side inner/outer cowl reinforcement (3) with
three capscrews (4) and locknuts (2). Tighten capscrews (4) to 35 lb-ft (47 N•m).
32.
Install passenger side footwell inner liner (12) to right front underbody armor (1) with capscrews
(7), (8), (9), (10), and (11), three spacers (6), spacers (14), and six locknuts (5). Tighten locknuts (5)
to 35 lb-ft (47 N•m).
33.
Install passenger side footwell outer liner (13) to right front underbody armor (1) with capscrews
(7), (8), (9), (10), and (11), three spacers (6), spacers (14), and six locknuts (5). Tighten locknuts (5)
to 35 lb-ft (47 N•m).
MATCH-DRILL 13/32-IN.
(10.3-MM) DIAMETER
(6 PLACES) (INNER ARMOR)
1
MATCH-DRILL 13/32-IN.
(10.3-MM) DIAMETER
(6 PLACES) (OUTER ARMOR)
RIGHT SIDE
LEFT SIDE
