25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d)
TM 9-2320-387-24-2
25-36.30
Change 1
20.
Move right front underbody armor (2) into place underneath vehicle with hydraulic jack and slowly
raise right front underbody armor (2) into position on vehicle.
21.
Apply sealing compound to seven capscrews (22), and install right front underbody armor (2) to
right rear underbody (1) with seven spacers (24), washers (23), and capscrews (22). Tighten
capscrews (22) to 23 lb-ft (31 N•m).
22.
Apply sealing compound to eight socket-head screws (20) and install right front underbody
armor (2) on vehicle side panel (21) with socket-head screws (20). Tighten socket-head screws (20)
to 75 lb-in. (8 N•m).
23.
Apply sealing compund to four capscrews (9), and install right front underbody armor (2) to
resilient mount shim (6) and resilient mount (7) with four capscrews (9) and washers (8). Tighten
capscrews (9) to 10 lb-ft (14 N•m).
24.
Apply sealing compound to six socket-head screws (5), and install three retainer plates (4) and
secure each with two socket-head screws (5). Tighten socket-head screws (5) to 35 lb-ft (47 N•m).
25.
Install passenger side footwell outer armor (18) on right front underbody armor (2) with fourteen
capscrews (19) and locknuts (17). Tighten locknuts (17) to 35 lb-ft (47 N•m).
26.
Install right front underbody armor (2) to right upper liner (10) with capscrews (11), (12), and (13)
and locknuts (14). Tighten locknuts (14) to 35 lb-ft (47 N•m).
27.
Apply sealing compound to twelve capscrews (16), and secure passenger side footwell inner armor
(15) to right front underbody armor hat section (3) with capscrews (16). Tighten
capscrews (16) to 23 lb-ft (31 N•m).
