TM 9-2320-387-24-2
25-36.12
Change 1
25-13.2. 10,500 LB HYDRAULIC WINCH REPAIR (Cont'd)
1.
Apply grease to roller bearings (2) of drum assembly (1).
2.
Apply grease to three planetary gear shafts (3) of drum assembly (1), to roller bearings (11) and
gear teeth (12) of three planetary gears (13), and washers (10).
3.
Install three planetary gears (13), planetary washers (10), and snap rings (9) on planetary shafts
(3) of drum assembly (1).
4.
Apply grease to splines (6) and planetary shaft holes (8) of plunger plate assembly (5).
5.
Install three planetary gear springs (4) (with smaller diameter of spring towards planetary gears
(13), plunger plate assembly (5), and three snap rings (7) on shafts (3) of drum assembly (1).
d. Assembly
3
6
4
12
13
11
10
9
5
7
8
2
1
