INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Automotive maintenance and repair: field
maintenance, basic (Appendix B, Item 6)
Materials/Parts
Sealing compound (Appendix C, Item 63)
Manual References
TM 9-2320-387-24P
TM 9-2320-387-24-2
25-8
Change 1
25-5. HEADER MAINTENANCE
This task covers:
a.
Removal
c.
Installation
b.
Inspection
Equipment Condition
Roof panel removed (para. 25-3).
Maintenance Level
Direct support
NOTE
Replacement procedures for left and right side headers are
basically the same. This procedure is for left side header.
1.
Remove two capscrews (1) and block (8) from header (2) and C-pillar (9).
2.
Remove two capscrews (5) and header (2) from windshield interior armor (4).
1.
Inspect seals (3), (6), and (7) for damage. If damaged, replace.
2.
Refer to para. 10-56 for plusnut inspection and replacement.
NOTE
Apply sealing compound to threads of capscrews prior to
installation.
1.
Install header (2) on windshield interior armor (4) with two capscrews (5).
2.
Align header (2) and tighten capscrews (5) to 10 lb-ft (14 N•m).
3.
Install header (2) on C-pillar (9) with block (8) and two capscrews (1). Tighten capscrews (1) to
68-82 lb-in. (8-9 N•m).
c. Installation
b. Inspection
a. Removal
