TM 9-2320-387-24-2
25-10
Change 1
25-6. WINDSHIELD MAINTENANCE
This task covers:
a.
Removal
c.
Installation
b.
Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Automotive maintenance and repair: field
maintenance, basic (Appendix B, Item 6)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Nine locknuts (Appendix G, Item 156)
Four lockwashers (Appendix G, Item 207)
Equipment Condition
• Rearview mirrors removed (para. 10-68).
• Wiper blades and arms removed (para. 10-62).
• Windshield wiper switch/motor removed
(para. 10-63).
• Windshield de-icer removed (para. 10-67).
• Roof panel removed (para. 25-3).
• Hood raised and secured (TM 9-2320-387-10).
• Air intake assembly removed (para. 3-19).
• Sun visors removed (para. 10-70).
• Air distribution duct right two registers removed
(para. 11-82).
General Safety Instructions
To prevent injury to fingers, place two wood blocks
between vehicle and windshield before placing
fingers between windshield and vehicle.
Maintenance Level
Direct support
1.
Install cardboard over windshield glass with masking tape.
2.
Remove two nuts (5), washers (2), capscrews (1), washers (2), and front supports (4) from two
clevises (3).
3.
Remove two screws (11) and clamps (12) from lower left deflector (13) and lower right deflector (15).
4.
Remove three nuts (8), washers (7), and capscrews (16) from right deflector (15).
5.
Remove screw (10), two capscrews (14), and lower left deflector (13) from body (6).
6.
Remove three capscrews (14) and lower right deflector (15) from body (6) and windshield (9).
7.
Remove six capscrews (22) from two brackets (20) and windshield (9).
8.
Remove four locknuts (18), lockwashers (19), socket-head screws (21), and two brackets (20) from
body (6). Discard locknuts (18) and lockwashers (19).
a. Removal
1
3
2
4
3
5
2
