TM 9-2320-387-24-2
24-22. - REAR BUMPER MOUNTING BRACKET AND ,TlEDOWN BRACKET REPLACEMENT
This task covers:
a. Removal
h. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Eight locknuts (Appendix G, Item 121)
Manual References
TM 9-2320-387-24P
Equipment Condition
l Rear body mount removed (para. 33-3).
l Tiedown ring removed (para. 9-4).
Maintenance Level
Direct support
1 a. Removal 1
1.
Remove four locknuts (91, washers (61, capscrews (5), and washers (6) from bumper mounting
bracket (7) and bumper (4). Discard locknuts (9).
2.
Remove four locknuts (81, washers (2), capscrews (31, washers (21, and bumper mounting bracket (7)
from frame rail (1). Discard locknuts (8).
b. Installation
1.
Install bumper mounting bracket (7) on frame rail (1) with four washers (21, capscrews (31,
washers (2), and locknuts (8).
2.
Install bumper mounting bracket (7) on bumper (4) with four washers (61, capscrews (5),
washers (61, and locknuts (9).
3.
Tighten locknuts (8) and (9) to 90 lb-ft (122 N-m).
FOLLOW-ON TASKS: l Install rear body mount (para. 33-3).
l Install tiedown ring (para. 9-4).
24-40
