NOTE
Perform step 80 for M1113 models. Perform step 81 for M1114
models.
80. Install air horn support bracket (15) on cylinder head (24) with stud (16), harness clamp (17),
lockwasher (18), nut (19), and capscrew (23).
81.
Install air horn support bracket (15) and adapter (23.1) on cylinder head (24) with stud (16) and
capscrew (23). Secure clamp (17) on air horn support bracket (15) with washer (25),
lockwasher (26), and capscrew (27).
82.
Install ground leads 7A (22) and 7E (20) on cylinder head (24) with capscrew (21).
15-28. ENGINE INSTALLATION (Cont’d)
TM 9-2320-387-24-2
Change 1
15-115
M1113
M1114
15
24
17
16
18
19
21
20
22
23
17
25
26
27
22
20
21
23.1
24
15
16
23
