15-27. ENGINE PREPARATION (Cont’d)
Change 1
15-83
TM 9-2320-387-24-2
14
15
14
20
20.1
16
21
22
23
21
22
23
22
2425
26
19
27
28
29
21
22
24
23.1
25
25
24
23
22
18
17
17
19
30
22
NOTE
Perform step 18 for M1114 vehicles only.
18.
Remove two nuts (18), lockwashers (17), capscrews (14), washer (20.1), lockwasher (17), A/C
compressor (20), and spacer (15) from mounting bracket (19) and bracket (16). Discard lockwashers
(7).
19.
Remove capscrew (30) and belt tensioner (29) from mounting bracket (19).
NOTE
On M1114 vehicles equipped with A/C, the compressor pulley is in
place of the lower idler pulley.
20.
Remove three nuts (25), lockwashers (24), washers (22), supports (23.1), capscrews (21),
washers (22), dust covers (22.1), and idler pulleys (23) from mounting bracket (19). Discard
lockwashers (24).
21.
Remove two capscrews (28) and lockwashers (27) from mounting bracket (19) and water pump (26).
Discard lockwashers (27).
21.1.
Remove screw (26.1), collar washer (25.1), and mounting bracket (19) from engine (25.2).
26.1
23.1
23.1
25.1
25.2
22.1
22.1
22.1
