TM 9-2320-387-24-2
1 S-27. ENGINE PREPARATION (Cont’d)
28.
Remove four capscrews (4) and right exhaust manifold heat shield (3) from exhaust manifold (2) and
cylinder head (1).
29.
Loosen locknut (9) and washer (8) on front of starter (7) and bracket (10).
WARNING
30.
31.
32.
Starter must be supported during removal. Failure to support
starter may cause injury to personnel or damage to equipment.
Remove two capscrews (111, washers (121, starter (71, and shim(s) (6);if present, from engine (5).
Remove three capscrews (151, lockwashers (141, and left and right engine mount and insulator
assemblies (13) from engine (5). Discard lockwashers (14).
Remove two nuts (171, lockwashers (161, and wiring harness bracket (18) from oil pan (19). Discard
lockwashers (16).
1586
