12-32. FRONT WINCH RECEPTACLE BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove four nuts (7), capscrews (3), control receptacle (6), and cover (2) from bracket (5).
2.
Remove two locknuts (4), capscrews (8), and bracket (5) from mounting bracket (1). Discard
locknuts (4).
INITIAL SETUP:
Applicable Models
M1113
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 126)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
b. Installation
1.
Install bracket (5) on mounting bracket (1) with two capscrews (8) and locknuts (4).
2.
Install cover (2) and control receptacle (6) on bracket (5) with four capscrews (3) and nuts (7).
TM 9-2320-387-24-2
Change 1 12-61
2
4
5
6
8
7
1
3
