TM 9-2320-387-24-2
12-31. FRONT WINCH CLUTCH ROD REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Ml113
Tools
General
mechanic’s tool kit:
automotive
(Appendix B, Item 1)
MateriaWParts
Locknut (Appendix G, Item 162)
Manual References
TM 9-2320-387-24P
Maintenance Level
unit
1 a. Removal
1
1.
Remove locknut (91, washer (101, rod end (121, two washers (111, and capscrew (13) from lever (1).
Discard locknut (9).
2.
Remove rod end (12) from clutch rod (6).
3.
Remove clutch rod (61 through bracket (7) and frame (2).
4.
Loosen nut (5) and remove handle (4) and nut (5) from clutch rod (6).
’
5.
Remove capscrew (3) and bracket (7) from winch (8).
b. Installation
1.
Install bracket (7) on winch (8) with capscrew (3).
2.
Install nut (5) and handle (4) on clutch rod (6). Tighten nut (5).
3.
Install clutch rod (6) through
frame (2) and bracket (71.
4.
Install rod end (121 on clutch rod (6).
NOTE
Adjust rod end as required to allow full clutch operation.
5.
Install capscrew (131, two washers (111, and rod end (121 on lever (1) with washer (10) and
locknut (9).
12-60
