TM 9-2320-387-24-2
1 12-30. FRONT FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Ml113
ToOlS
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
General Safety Instructions
Winch must be supported during removal and
installation.
Maintenance Level
Unit
WARNING
Winch must be supported during removal and installation. Failure
to support winch may result in injury to personnel or damage to
equipment.
pYYizzq
I.
Remove four retaining rings (8), two shafts (7), and rollers (9) from bracket (6).
2.
Remove four retaining rings (4), two shafts (3), and rollers (10) from bracket (6).
3.
Remove two capscrews (l), washers (2), and bracket (6) from bumper (5).
-1
I.
Install bracket (6) on bumper (5) with two washers (2) and capscrews (1). Tighten capscrews (I) to
35 lb-f% (47 Nom).
2.
Install two rollers (10) and shafts (3) on bracket (6) with four retaining rings (4).
3.
Install two rollers (9) and shafts (7) on bracket (6) with four retaining rings (8).
1249
