TM 9-2320-387-24-2
12-30
Change 1
12-17. RADIO RACK AND MOUNTING BRACKETS REPLACEMENT (Cont’d)
b. Installation
1.
Position three spacers (18) and support bracket (17) on tunnel floor (16) and install with three
washers (24), lockwashers (23), and capscrews (22).
2.
Install two brackets (13) on support bracket (17) with four washers (19), lockwashers (20), and
capscrews (21). Tighten capscrews (21) to 8 lb-ft (11 N•m).
3.
Install two brackets (5) on A-beam (10) with two washers (7) and capscrews (8). Tighten
capscrews (8) to 6 lb-ft (8 N•m).
4.
Install headphone mounting bracket (27) on radio rack (1) with two screws (28), washers (26), and
locknuts (25). Tighten locknuts (25) to 6 lb-ft (8 N•m).
5.
Install radio rack (1) on two brackets (13) with two capscrews (12), washers (15), and locknuts (14).
Tighten locknuts (14) to 8-10 lb-ft (11-14 N•m).
NOTE
Perform steps 6 and 7 for M1114 vehicles.
6.
Install rifle mounting clamp (31) on bracket (30) with two capscrews (32) and locknuts (33).
7.
Install bracket (30) with rifle mounting clamp (31) and radio rack (1) on two brackets (5) with
four capscrews (3), washers (4), and locknuts (6).
NOTE
Perform steps 8 and 9 for M1113 vehicles.
8.
Install radio rack (1) on two brackets (5) with four washers (4), capscrews (3), washers (4), and
locknuts (6).
9.
Install cables (29) and two clamps (9) on radio rack (1) with two screws (2) and nut and lockwasher
assemblies (11).
