TM 9-2320-387-24-2
Change 1
12-23
12-13. ENGINE/CREW COMPARTMENT HEATER CONTROLLER REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three lockwashers (Appendix G, Item 239.1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Battery ground cables disconnected (para. 4-68).
Maintenance Level
Unit
FOLLOW-ON TASK: Connect battery ground cables (para. 4-68).
NOTE
Prior to removal, tag leads for installation.
1.
Remove three capscrews (8) and lockwashers (7) from heat shield (6). Discard lockwashers (7).
2.
Move heat shield (6) away from heater (1) and disconnect plug (2) and harness connectors (4)
and (5) from controller (3).
3.
Lift up on controller (3) and remove from heater (1).
1.
Install controller (3) on heater (1).
2.
Connect plug (2) and harness connectors (4) and (5) to controller (3).
3.
Install heat shield (6) on heater (1) with three lockwashers (7) and capscrews (8).
b. Installation
a. Removal
1
2
3
4
5
6
7
8
