TM 9-2320-387-24-2
12-20
Change 1
12-11. ENGINE/CREW COMPARTMENT HEATER WIRING HARNESS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
• Battery ground cables disconnected (para. 4-68).
• Heat shield removed (para. 12-2).
• Air horn removed (para. 3-14).
Maintenance Level
Unit
CAUTION
Use care when removing harness. Failure to do so will cause
damage to harness.
1.
Remove cover (1) from heater (4).
2.
Disconnect wiring harness connector (2) from heater harness connector (7).
3.
Disconnect wiring harness connector (6) from heater control unit (5).
4.
Remove wiring harness (3) from vehicle.
CAUTION
Use care when installing harness. Failure to do so will cause
damage to harness.
1.
Position wiring harness (3) in vehicle.
2.
Connect wiring harness connector (2) to heater harness connector (7).
3.
Connect wiring harness connector (6) to heater control unit (5).
4.
Install cover (1) on heater (4).
b. Installation
a. Removal
