TM 9-2320-387-24-2
12-4
Change 1
12-4.1. ENGINE/CREW COMPARTMENT HEATER INLET PIPE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Heat shield removed (para. 12-2).
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
Maintenance Level
Unit
.WARNING.
Do not touch hot exhaust system components with bare hands.
Severe injury may result.
1.
Remove clamp (4) and inlet pipe (3) from muffler (5).
2.
Remove clamp (2) and inlet pipe (3) from heater (1).
1.
Install clamps (2) and (4) on inlet pipe (3).
2.
Install inlet pipe (3) on heater (1) and tighten clamp (2).
3.
Install inlet pipe (3) on muffler (5) and tighten clamp (4).
b. Installation
a. Removal
