12-4. ENGINE/CREW COMPARTMENT HEATER EXHAUST PIPE REPLACEMENT

12-3. ENGINE/CREW COMPARTMENT HEATER EXHAUST MUFFLER REPLACEMENT

12-4.1. ENGINE/CREW COMPARTMENT HEATER INLET PIPE REPLACEMENT

TM-9-2320-387-24-2 Truck Utility: Shelter Carrier 4 x 4 M113 Truck Utility: UP-Armored Carrier 4 x 4 M114 Manual
Page Navigation
362

TM 9-2320-387-24-2 Change 1 12-3 12-4. ENGINE/CREW COMPARTMENT HEATER EXHAUST PIPE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P Equipment Condition Heat shield removed (para. 12-2). .WARNING. Do not touch hot exhaust system components with bare hands. Severe injury may result. 1. Remove clamp (2) and exhaust pipe (3) from muffler (1). 2. Remove clamp (5) and exhaust pipe (3) from heater (4). 1. Install clamps (2) and (5) on exhaust pipe (3). 2. Install exhaust pipe (3) on heater (4) and tighten clamp (5). 3. Install exhaust pipe (3) on muffler (1) and tighten clamp (2). b. Installation a. Removal 1 2 3 4 5 3 General Safety Instructions Do not touch hot exhaust system components with bare hands. Maintenance Level Unit FOLLOW-ON TASK: Install heat shield (para. 12-2).

Privacy Statement
Press Release
Contact