TM 9-2320-387-24-Z
1 l-90.
REAR CARGO
DOOR
ACCESS
This task covers:
a. Lifting
b. Lowering
INITIAL SETUP:
Applicable Models
Ml114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
General Safety Instructions
Stand clear during hoisting operations. A heavy
or swinging load can cause injury.
Maintenance Level
Unit
WARNING
Direct all personnel to stand clear during hoisting operations. A
heavy or swinging load can cause injury to personnel and damage
to equipment.
1.
Position lifting device over top of rear cargo door (1).
2.
Pull door handle (4) and release.
3.
Connect lifting chains (2) to lifting device (3).
4.
Holding rear cargo door (1) open, connect lifting chains (2) at two comers of rear cargo door (1).
5.
Using lifting device, raise rear cargo door (1) to full open position.
6.
Remove lifting chains (2) and lifting device (3).
Pull on strap (8) to lower door (11, then slam door (1) shut. Ensure door (1) is locked by observing
alignment of door surface (7) with cargo shell surface side (6) and bottom edges (5).
1 l-160
