11-85. CONDENSER FAN EXHAUST AND SUPPLY VENT MAINTENANCE
This task covers:
a. Exhaust Vents Removal
d. Exhaust Vents Installation
b. Supply Vents Removal
e. Supply Vents Installation
c. Inspection
Remove fifteen screws (3), lockwashers (3.1), washers (3.2), and three A/C exhaust vents (2) from cargo
shell (1). Discard lockwashers (3.1).
Remove twelve screws (6), lockwashers (6.1), washers (6.2), two A/C supply vents (5), and screen (4) from
cargo shell (1). Discard lockwashers (6.1).
Refer to para. 10-56 for plusnut (7) inspection and replacement.
Apply sealing compound to threads of fifteen screws (3), and install three A/C exhaust vents (2) on
cargo shell (1) with fifteen washers (3.2), lockwashers (3.1), and screws (3). Tighten screws (3) to
36 lb-in. (4 N•m).
Apply sealing compound to threads of twelve screws (6), and install screen (4) and two A/C supply vents (5)
on cargo shell (1) with twelve washers (6.2), lockwashers (6.1), and screws (6). Tighten screws (6) to
36 lb-in. (4 N•m).
e. Supply Vents Installation
d. Exhaust Vents Installation
c. Inspection
b. Supply Vents Removal
a. Exhaust Vents Removal
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Twenty-seven lockwashers
(Appendix G, Item 200)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
TM 9-2320-387-24-2
11-152
Change 1
