TM 9-2320-387-24-2
1 l-84. A/C TOGGLE SWITCH AND HARNESS REPLACEMENT
This task covers:
a. Removal
INITIAL SETUP:
b. Installation
Applicable Models
Manual References
Ml114
TM 9-2320-387-24P
Tools
General mechanic’s
tool hit:
automotive (Appendix B, Item 1)
Equipment Condition
Battery ground cables disconnected (para. 4-68).
Maintenance
Level
unit
NOTE
Prior to removal, tag leads for installation.
1.
Remove register (1) from air distribution duct (5) by carefully prying out.
2.
Remove nut (7) from toggle switch (9).
3.
Remove toggle switch (9) from air distribution duct (5) and route toggle switch (9) through register
opening (6).
4.
Remove two screws (8) and leads (10) from toggle switch (9).
5.
Disconnect harness connector (2) from connector (3) and remove harness (4) from air distribution
duct (5).
1.
Position harness (4) in air distribution duct (5).
2.
Install two leads (10) on toggle switch (9) with two screws (8).
3.
Install toggle switch (9) on air distribution duct (5) with nut (7).
4.
Install register (1) on air distribution duct (5) by carefully pushing in place.
5.
Connect harness connector (2) to connector (3).
1 l-150
