TM 9-2320-387-24-2
1 1 l-79.
SHELTER SUPPORT ASSEMBLY REPLACEMENT (Cont’d)
I
4.
5.
6.
7.
8.
9.
10.
Install two washers (71, capscrews (81, washers (71, and locknuts (21) on support assembly (271 and
cargo floor (22).
Install six spacers (11, washers (21, capscrews (31, reinforcement plates (231 and (251, six washers (21,
and locknuts (241 on support assembly (271, cargo floor (221, and B-beam (261.
Install two spacers (61, washers (51, capscrews (4), washers (21, and locknuts (24) on support
assembly (271, cargo floor (221, and B-beam (261.
Install two washers (101, capscrews (91, washers (7), and locknuts (211 on support assembly (271 and
cargo floor (221.
Tighten four locknuts (19) to 26 lb-ft (35 N-m).
Tighten locknuts (181, (201, (211, and (24) to 65 lb& (88 N-m).
Install clamp (32) on fuel filler spout (28) and body (31) with washer (301, capscrew (291, washer (331,
and locknut (341.
FOLLOW-ON TASKS: l Install shelter (para. 11-78).
l Roll down rear soft top curtain (TM 9-2320-387-10).
l Install fuel filler housing (para. 10-2).
l Install shelter carrier tailgate brackets (para. 11-74).
1 l-143/(1 1-144 blank)
