TM 2320-387-24-2
1 l-75.
SHELTER CARRIER TAILGATE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
1
Applicable Models
Ml113
Tools
Personnel Required
One mechanic
One assistant
General
mechanic’s
tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Ten locknuts (Appendix G, Item 184)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
1
a. Removal
1
1.
Remove four 10ckn~t.s
(9), washers (2), capscrews (l), washers (2), and right and lefi side tailgate
chain brackets (10) from tailgate (8). Discard locknuts (9).
NOTE
Noti number and location of shims prior to removal for i&dlatiOn.
2.
Remove six locknuts (3), washers (4), capscrews (7), tailgate (8), and shims (6) from two tailgate
mounting brackets (5). Discard locknuts (3).
b. Installation
1.
Install
shims (6) and tailgate (8) on two tailgate mounting brackets (5) with six capscrews (7),
washers (4), and locknuts (3). Tighten locknuts (3) to 26 lb-ft (35 Wm).
2.
Install right and left side tailgate chain brackets (10) on tailgate (8) with four washers (2), cap-
screws (I), washers (2), and locknuts (9). Tighten locknuts (9) to 15 lb-fi (20 Nd.
11-136
