11-114
Change 1
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealant (Appendix C, Item 74)
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Turret door open (TM 9-2320-387-10)
Maintenance Level
Unit
11-60. NIGHT VISION MOUNT REPLACEMENT
This task covers:
a. Removal
b. Installation
1.
Remove two capscrews (4) and footman loop (3) from bracket lid (2).
2.
Remove two nuts (6), capscrews (1), and bracket lid (2) from bracket (7).
3.
Remove two nuts (16), washers (17), capscrews (5), bracket (7), and two spacers (19) from pedestal (9).
4.
Remove six capscrews (8), clamping catch (14), and pedestal (9) from turret armor (11) and
support (15).
5.
Remove two capscrews (13), washers (12), and support (15) from turret armor (11) and turret
bearing (10).
1.
Apply sealing compound to threads of two capscrews (13), and install support (15) on turret
bearing (10) and turret armor (11) with two washers (12) and capscrews (13). Tighten
capscrews (13) to 37 lb-ft (50 N•m).
2.
Apply sealant around pedestal mount holes (18) in turret armor (11).
3.
Apply sealing compound to threads of six capscrews (8), and install pedestal (9) and clamping
catch (14) on turret armor (11) with capscrews (8). Tighten capscrews (8) to 37 lb-ft (50 N•m).
4.
Apply sealant around bracket (7) mounting holes in pedestal (9).
5.
Install two spacers (19) and bracket (7) on pedestal (9) with two capscrews (5), washers (17), and
nuts (16). Tighten nuts (16) to 37 lb-ft (50 N•m).
6.
Install lid (2) on bracket (7) with two capscrews (1) and nuts (6). Tighten nuts (6) to 10 lb-ft
(14 N•m).
7.
Apply sealing compound to threads of two capscrews (4), and install footman loop (3) on bracket
lid (2) with capscrews (4). Tighten capscrews (4) to 30 lb-in. (3 N•m).
b.
Installation
a.
Removal
TM 9-2320-387-24-2
