11-58. NIGHT VISION LID BUMPER AND BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Riveter tool kit (Appendix B, Item 123)
Materials/Parts
Two rivets (Appendix G, Item 349)
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
NOTE
For replacement of rivets, refer to para. 10-56.
1.
Remove two socket-head screws (2) and bumper (1) from night vision lid bumper bracket (5).
2.
Remove two rivets (3) and night vision lid bumper bracket (5) from brush seal (4).
1.
Install night vision lid bumper bracket (5) on brush seal (4) with two rivets (3).
2.
Apply sealing compound to threads of two socket-head screws (2), and install bumper (1) on night
vision lid bumper bracket (5) with socket-head screws (2). Tighten socket-head screws (2) to
68-82 lb-in. (8-9 N•m).
b. Installation
a. Removal
TM 9-2320-387-24-2
11-112
Change 1
2
1
5
3
4
