TM 9-2320-387-24-2
I
1 l-54.
TURRET
BACKREST REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Ml114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
RTV sealant (Appendix C, Item 741
Manual References
TM 9-2320-387-10.
TM 9-2320-387-24P
Equipment Condition
Turret door opened (TM 9-2320-387-102
Maintenance Level
Unit
1 a. Removal 1
1. Remove two nuts (31, washers (4), and capscrews (1) from turret hatch door (9) and turret (2).
2. Remove capscrew W, washer (6), backrest (71, and spacer (8) from turret (21.
-1
1. Apply sealant around screw mounting holes in turret hatch door (9).
NOTE
Apply sealant to capscrews prior to installation.
2. Install spacer (8) and backrest (7) on turret (2) with washer (6) and capscrew (5). Tighten
capscrew (51 to 37 lb-ft (50 N-m).
3. Install two capscrews (11, washers (41, andnuts (3) on turret hatch door (91 and turret (2). Tighten
capscrews (11 to 37 lb-R (50 Nom).
1 l-106
