11-11. DOOR SEAL AND PULL STRAP REPLACEMENT
This task covers:
a. Door Seal Removal
c.
Door Pull Strap Removal
b. Door Seal Installation
d. Door Pull Strap Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Seal (Appendix G, Item 400)
Two lockwashers (Appendix G, Item 200)
RTV sealant (Appendix C, Item 74)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
TM 9-2320-387-24-2
11-22
Change 1
Remove door seal (2) from door (1) and clean adhesive from door (1).
Install door seal (2) on door (1) with sealant.
Remove two screws (5), lockwashers (6), washers (4), and door pull strap (3) from door (1). Discard
lockwashers (6).
Install door pull strap (3) on door (1) with two washers (4), lockwashers (6), and screws (5). Tighten
screws (5) to 21 lb-in. (2 N•m).
d. Door Pull Strap Installation
c. Door Pull Strap Removal
b. Door Seal Installation
a. Door Seal Removal
