TM 9-2320-387-24-2
1 O-78. HEATER CONTROL REPLACEMENT
I
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Tools
?&era1
mechanic’s tool kit:
automotive (Appendix B, Item 11
hlanual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Hood raised and secured (TM 9-2320-387-101.
l Engine access cover removed (para. 10-221.
Maintenance
Level
Unit
1
a. Removal
1
1. Remove screw (12) and clamp (11) from cable (7) and heater shutoff valve (15).
2.
Remove control wire (10) from pin (9) on heater shutoff valve (151.
3.
Carefully feed cable (7) through three clips (13) along A-beam (14).
4.
Remove four capscrews (2) from instrument cluster (6) and instrument panel (3).
5.
Pull instrument cluster (6) away from instrument panel (3).
6.
Loosen nut (41 and slide along cable (7).
7.
Pull cable (7) through nut (4) and instrument panel (3).
-1
1. Feed cable (7) through instrument panel (3) and seat threaded shaft (1) in grommet (5).
2.
Place nut (4) over cable (7) and secure threaded shaft (1) on instrument panel (31 by tightening
nut (41.
3.
Install instrument cluster (6) on instrument panel (3) with four capscrews (2).
4.
Carefully feed cable (7) through three clips (13) along A-beam (141.
5.
Slip coiled end of control wire (10) over pin (9).
NOTE
Control wire and knob must be pushed in, and pin and lever
rotated toward heater before anchoring cable to shutoff valve.
6.
With control wire (10) and knob all the way in, and pin (9) moved as close to heater (8) as possible,
install cable (7) on shutoff valve (15) with clamp (11) and screw (12).
10-134
