33-14. RIGHT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-108
Change 1
10.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded area of metal
strip F (1).
11.
Apply adhesive sealant to shaded area on right rear floor panel (2) and insert panel (3).
12.
Position metal strip F (1) on right rear floor panel (2) and insert panel (3), and install metal strip F (1)
on insert panel (3) with three rivets (6).
13.
Using metal strip F (1) as a template, locate, mark, and drill eleven 0.187-in. (4.75-mm) diameter
holes through right rear floor panel (2) and insert panel (3).
14.
Secure metal strip F (1) to right rear floor panel (2) and insert panel (3) with four rivets (4).
15.
Secure metal strip F (1) on insert panel (3) and right rear floor panel (2) with seven rivets (5).
16.
Spot-paint insert panel (3) and right rear floor panel (2). (Refer to TM 43-0139.)
