TM 9-2320-387-24-2
33-30
Change 1
33-11. LEFT FRONT FLOOR PANEL REPAIR (Cont’d)
1.
Position metal strip D (2), with arrow facing up and toward metal strip A (4), on insert panel (1).
Align reference lines (3).
2.
Using metal strip D (2) as a template, locate, mark, and drill seven 0.187-in. (4.75-mm) diameter
holes through insert panel (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded mating surface
of insert panel (1) and metal strip D (2).
4.
Position metal strip D (2) on insert panel (1) and install with seven rivets (5).
5.
Remove any adhesive residue and clean edges of metal strip D (2) and insert panel (1).
1.
Position metal strip B (6), with arrow facing up and toward metal strip C (8), on insert
panel (1). Align reference line (7) with edge of metal strip B (6).
2.
Using metal strip B (6) as a template, locate, mark, and drill twelve 0.187-in. (4.75-mm) diameter
holes through insert panel (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (1) and metal strip B (6).
g. Metal Strip B and Insert Panel Assembly
f. Metal Strip D and Insert Panel Assembly
DRILL SEVEN 0.187-IN (4.75 MM)
DIAMETER HOLES
