TM 9-2320-387-24-2
33-28
Change 1
33-11. LEFT FRONT FLOOR PANEL REPAIR (Cont’d)
1.
Position metal strip C (1), with arrow facing up and toward metal strip A (4), on insert panel (2).
Align reference lines (3).
2.
Using metal strip C (1) as a template, locate, mark, and drill seven 0.187-in. (4.75-mm) diameter
holes in insert panel (2). Remove metal strip C (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (2) and metal strip C (1).
4.
Position metal strip C (1) on insert panel (2) and install with seven rivets (5).
5.
Remove any adhesive residue and clean edges of metal strip C (1) and insert panel (2).
e. Metal Strip C and Insert Panel Assembly
DRILL SEVEN 0.187-IN. (4.75-MM) DIAMETER HOLES
5
