TM 9-2320-387-24-2
33-26
Change 1
33-11. LEFT FRONT FLOOR PANEL REPAIR (Cont’d)
7.
Position insert panel (2), with arrow facing down and toward front of vehicle, to underside of left
front floor panel (1).
8.
Obtain a minimum clearance of 0.10-in. (2.54-mm) between edges of insert panel (2) and left front
floor panel (1).
9.
Remove insert panel (2).
1.
Position metal strip A (3), with arrow facing up and left, on insert panel (2). Align reference lines
(5) and (4) with edges of metal strip A (3).
2.
Using metal strip A (3) as a template, locate, mark, and drill thirteen 0.187-in.(4.75-mm)
diameter holes through insert panel (2).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (2) and metal strip A (3).
4.
Install metal strip A (3) on insert panel (2) with thirteen rivets (6).
5.
Remove adhesive residue and clean edges of metal strip A (3) and insert panel (2).
d. Metal Strip A and Insert Panel Assembly
