TM 9-2320-387-24-2
-- 3 l-3. STEERING GEAR REPAIR (Cont’d)
-1
13.
14.
15.
16.
17.
NOTE
Soak Teflon rings in warm water to ease assembly.
Starting on inner seal ring groove, install O-ring seal (21 and a backup Teflon ring (11 on valve
body (11).
Repeat step 13 in order from innermost seal ring groove and install two remaining O-rings (21 and
Teflon rings (1) on valve body (11).
NOTE
Rotate valve spool to install in valve.
Install O-ring (9) on valve (8) and install valve (8) into valve body (111 until flush with notched end
of valve body (11).
Install stub shaft (6) in valve 03) so pin (3) on stub shaft (6) engages hole (7) in valve (8).
Align notch (5) in stub shaft cap (41 with pin (10) in valve body (111 and press stub shaft (6) and
valve (8) into valve body (111.
31-14
