TM 9-2320-387-24-2
10-58.2. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d)
10-98.6
Change 1
1.
Remove six locknuts (6), washers (2), capscrews (3), washers (2), two transmission support
brackets (4), and four rubber washers (5) from intermediate shield (1) and transmission mount
crossmember (7). Discard locknuts (6) and rubber washers (5).
2.
Remove locknut (8), washer (9), capscrew (10), and washer (9) from right support bracket (15) and
right side frame rail (16). Discard locknut (8).
3.
Remove locknut (22), washer (19), capscrew (18), and washer (19) from left support bracket (24),
engine mount bracket (17), and left side frame rail (23). Discard locknut (22).
4.
Remove four locknuts (14), washers (12), capscrews (11), washers (12), and right side support
bracket (15) from right side mounting bracket (13). Discard locknuts (14).
5.
Remove four locknuts (26), washers (21), capscrews (20), washers (21), and left side support
bracket (24) from left side mounting bracket (25). Discard locknuts (26).
6.
Remove two locknuts (29), washers (30), capscrews (31), washers (30), and intermediate shield (1)
from front crossmember (27) and front shield (28). Discard locknuts (29).
c. Intermediate Shield Removal
