TM 9-2320-387-24-2
1
30-3.
DIFFERENTIAL
REPAIR (Cont’d)
I
20.
L&~&e
front bearing (2) and pinion seal (1) with lubricating oil. Using yoke seal installer, install
front bearing (2) and pinion seal (1) in housing (3).
21.
Rotate housing (3) 180”. Lubricate outside diameter of rear bearing cup (4) with lubricating oil.
NOTE
If pinion shim is beveled, ensure beveled side faces bottom of
bearing cup bore.
22.
Using driver handle and rear bearing installer, install correct thickness pinion shim (5) and rear
bearing cup (4) in housing (3).
I
30-16
