30-3. DIFFERENTIAL REPAIR (Cont’d)
NOTE
If rear pinion yoke is being replaced, a new slinger must be installed
on new pinion yoke. Ensure slinger is seated against rear shoulder of
yoke.
3.
Inspect splines and sealing surfaces on output flanges (1), pinion yoke (2), and two output
shafts (3) for damage. Replace if damaged.
4.
Inspect all bearings (4) and bearing cups (5) for damage. Replace bearings (4) and bearing cups (5)
in matched sets if either is damaged.
5.
Inspect differential case (6) for damage. Replace if damaged.
TM 9-2320-387-24-2
30-10
Change 1
1
2
3
4
5
6
